Advertisement
Dustbin
PRODUCT INTRODUCTION
Maintenance dustbin
1. Press the button and pull the dustbin out backwards.
Filter cover
2. Open, empty and clean the dustbin.
Dustbin button
Clean it regularly
Maintenance filter
3. Remove the filter gauze, sponge, and HEPA.
4. Clean the removed filter gauze, sponge, and HEPA with
water if needed.
Wall sensor
5. Shake off the water drops and dry the pieces naturally,
only use them after they have completely dried.
6. When dry, install them in the following sequence:
filter gauze - sponge -HEPA.
Filter gauze
Button
Filter cover
Infrared recharging sensor
Sponge
HEPA
LDS laser ranging sensor
Anti-collision sensor for radar
Anti-collision sensor
Advertisement
