Table of Contents
Advertisement
Section 5
GOOSE
36
GUID-29D8DFB6-A78A-4697-A318-A7CC751DFA3E V2 EN
Figure 23:
Adding the GOOSERCV function block
3.
Create the connection into the application.
4.
To open the Signal Matrix Tool, right-click the IED, and select Signal
Matrix.
5.
To map the input points to the receiving input data, click the cell.
To expand the source field, click the edge of the field and expand it until the
whole GOOSE source address is visible.
6.
In Signal Matrix Tool in the GOOSE sheet, the GOOSE publisher data is
mapped into the corresponding GOOSERCV function block.
The columns in the GOOSE sheet represent publisher data and the rows
represent the possible subscriber input point.
GUID-D0C421D1-7DB3-4ECA-858A-4FEB17C863D0 V2 EN
Figure 24:
GOOSE sheet in Signal Matrix Tool
If the data type does not match with the GOOSERCV function
block, the attribute cell is red. The only supported data type is
the single binary.
In Signal Matrix Tool, the received GOOSE data can be directly connected to
the IED application. The GOOSE inputs are shown on the GOOSE sheet and
they can be connected to the application receiver function blocks. The
columns represent publisher data and the rows represent the possible
subscriber input points.
If the data type, for example double binary data, is not supported by the IED
application, the attribute column is red. The quality attribute is automatically
1MRS757255 B
Breaker Integrated Protection RBX615
Engineering Guide
Advertisement
Table of Contents
