Changing The Bit Image Mode/Esc - Citizen PD 22 PD-22 PD-22 Command Reference Manual

Changing the bit image mode/ESC ?

[ASCII]
[Decimal]
[Hexadecimal]
[Parameter]
[Description]
● Converts the bit image mode of ESC K, ESC L, ESC Y, and ESC Z into the mode of ESC *.
● Specifies the value of 'm' in the same manner as parameter 'm' to be specified in ESC * modes.
● 'c' indicates the type of bit image (ESC K, ESC L, ESC Y, ESC Z) to be converted.
● Specifies 'c' as follows.
ESC K → ESC ? K m
ESC L → ESC ? L m
ESC Y → ESC ? Y m
ESC Z →ESC ? Z m
●The power-ON default setting of each code is as follows.
ESC K → ESC * 0
ESC L → ESC * 1
ESC Y → ESC * 2
ESC Z → ESC * 3
ESC ? c
27 63 c
1B 3F c
c = "K", "L", "Y", "Z" (4Bh, 4Ch, 59h, 5Ah)
m = 0, 1, 2, 3, 4, 6, 32, 33, 38, 39
m
m
m
91