Copying Character Set/Esc - Citizen PD 22 PD-22 PD-22 Command Reference Manual

Copying character set/ESC:

[ASCII]
[Decimal]
[Hexadecimal]
[Parameter]
[Description]
● 's' is a font number of embedded character set.
● Copies the currently selected character set to a download character set.
● Specify a character attribute (high-quality character, proportional character, 15CPI, super/subscript character) to be
copied before entering this code. Defined characters are printed in this pitch. Note, however, that characters are printed
in the character width pitch defined when 'proportional' is specified.
● Clear download characters already defined before copying a character set. Copying range is characters
from 20h to 7Eh.
ESC : NUL
27 53 0
1B 3A 00
n = 0, 1,2, 3, 4.
n s
n s
n s
s = 0
83