Setting the spacing of characters/ESC SP
[ASCII]
[Decimal]
[Hexadecimal]
[Parameter]
[Description]
● Sets the spacing of characters.
● "n" indicates the number of dots. Calculation unit is 1/203 inch.
● Default is n=0
● Sets the right spacing of characters to [n × basic calculation unit] inches. Spacing of characters will be
indicated as follows.
● If the horizontal magnification of character is 2 or more, the spacing increases with the magnification.
● Character width used during horizontal tab position, left margin, right margin setting includes space
between characters.
ESC
SP
n
27
32
n
1B
20
n
0 ≤ n ≤ 127
Number of dots of each character
A A A
Space secured by ESC SP
80