Enabling/Disabling The Black Mark Function/ Esc~E - Citizen PD 22 PD-22 PD-22 Command Reference Manual

Enabling/disabling the black mark function/ ESC~E

[ASCII]
[Decimal]
[Hexadecimal]
[Parameter]
[Description]
● Selects the enabling/disabling of the black mark function.
● By the setting memory with parameter 'n' = 1 or 0, the enabled/disabled state of the mark function setting is saved in the
flash memory storage area in the printer. After data are written into the flash memory, the printer power is automatically
turned OFF. The set values are reflected at the next power ON.
● By the temporary setting with parameter 'n' = 4 or 3, the mark function setting is enabled/disabled when
ESC~E command is received. This content remains effective until it is newly switched to enabled/disabled
by setting the parameter 'n' to 4 or 3, or the printer is powered OFF.
ESC ~ E
27 126 69
1B 7E 45
n = 0: Mark function disabled (the setting saved)
1: Mark function enabled (the setting saved)
3: Mark function disabled (temporary setting)
4: Mark function enabled (temporary setting)
n
n
n
33