Electrolux COP740X User Manual page 34

34 www.electrolux.com
Accessories
12.2 How to remove: Shelf
supports
Remove the shelf supports to clean the
oven.
Step 1
Step 2
Step 3
Step 4
12.3 How to use: Pyrolysis
Clean the oven with Pyrolysis.
WARNING!
There is a risk of burns.
Turn off the oven and
wait until it is cold.
Step 1
Step 2
Clean all accessories after each use and let them dry. Use a soft
cloth with warm water and a mild detergent. Do not clean the acces‐
sories in a dishwasher.
Do not clean the non-stick accessories using abrasive cleaner or
sharp-edged objects.
Turn off the oven and wait
until it is cold.
Pull the front of the shelf
support away from the side
wall.
Pull the rear end of the shelf
support away from the side
wall and remove it.
Install the shelf supports in
the opposite sequence.
Remove all accessories.
Set the function: .
Turn the control knob (for the temperature) to set the cleaning mode.
1
Before the Pyrolysis:
- flashes.
2
CAUTION!
If there are other appliances
installed in the same
cabinet, do not use them at
the same time as this
function. It can cause
damage to the oven.
Clean the oven floor and the
inner door glass with warm
water, a soft cloth and a mild
detergent.