Assembling The Ruggedcom Mx5000 And Ruggedcom Mx5000Re - Siemens SIMATIC NET RUGGEDCOM MX5000RE Installation Manual

Installing the Device
2.9 Assembling the RUGGEDCOM MX5000 and RUGGEDCOM MX5000RE
2.9 Assembling the RUGGEDCOM MX5000 and RUGGEDCOM
MX5000RE
To install the RUGGEDCOM MX5000 in the RUGGEDCOM MX5000RE, do the
following:
1. Position the RUGGEDCOM MX5000RE with the front opening facing up.
Figure 2.11
20
#10-32×1" Screw
1
#10 Split Lockwasher
2
#10 Flat Washers
3
Grounding Cable
4
#10 Exterior Tooth Lockwasher
5
#10-32 Hex Nut
6
Power Supply Cable Assemblies
7
#6-32×3/8" SS304 Truss Head Philips Drive Screw
8
Inside Grounding Stud
9
MX5000 and RUGGEDCOM MX5000RE Assembly
8 9
Installation Manual, 01/2021, C79000-G8976-1060-13
1
2
3
4
5
6
7
RUGGEDCOM MX5000RE