Assembling - Siemens SINAMICS G120 Operating Instructions Manual

Assembling

Requirement
The rail adapter is screwed to the lower side of the CM using the screw (M3x6) provided in
the mounting kit.
Figure 4-1
NOTICE
Only the original parts (mounting rail adapter) and the supplied screws may be used.
Tools required
Torx screwdriver to screw on the mounting rail adapter.
Tightening torque: 0.6 Nm
Chemical industry module CM240NE with CU250S-2 DP
Operating Instructions, 03/2014, A5E34142527B-AA
Rail mounting
4
23