Modules - Siemens SIMATIC NET RUGGEDCOM MX5000RE Installation Manual

Modules

The RUGGEDCOM MX5000RERUGGEDCOM MX5000 features slots for up to two
power modules and eight line modules, which can be used to expand and customize
the capabilities of the device to suit specific applications. A variety of modules are
available, each featuring a specific type of communication port: copper Ethernet,
fiber optic Ethernet, SFP or serial.
Two slots are reserved for one control module (required) and one switch module
(optional).
All modules are field-replaceable.
Use the RUGGEDCOM MX5000RE software to determine which ports are equipped
on the device. For more information, refer to the RUGGEDCOM ROX Configuration
Manual for the device.
Note
Switch modules are only compatible with 8-port fiber optic Ethernet modules.
1
2
3
4
5
6
7
8
9
10
Figure 4.1
RUGGEDCOM MX5000RE
Installation Manual, 01/2021, C79000-G8976-1060-13
1 2 3
Power Supply Module (PS1)
Ethernet Module Slot (LM1)
Ethernet Module Slot (LM2)
Ethernet Module Slot (LM3)
Control Module (CM)
Switch Module (SM)
Ethernet Module Slot (LM4)
Ethernet Module Slot (LM5)
Ethernet Module Slot (LM6)
Power Supply Module (PS2)
Available Chassis Slots
4 5 6 7 8 9
4
10
33