Assembling; General Requirements - Siemens SIMOTION SCOUT D410 Manual

Assembling

4.1

General requirements

Mounting options
SIMOTION D410 comes in two designs:
● Mounted on the power module: SIMOTION D410 is mounted on the PM340 power
● Operation away from the power module: SIMOTION D410 is mounted on a mounting
Open device
SIMOTION D410 is an open device! This means, you can only install the modules in
housings, cabinets or electrical equipment rooms. These may only be accessible via key or
tool. Housings, cabinets, or electrical equipment rooms may only be accessed by trained or
authorized personnel. An external fire-protection housing is required.
The system must be without power when you mount the housing.
D410
Manual, 05/2009
module.
plate.
DANGER
4
55