Dmx Operation; Dmx Addressing - ProLights LASERCOMBY User Manual

12

3.10 DMX OPERATION

LASERCOMBY uses up to 12 DMX channels in its 12-channel DMX mode, which defines the highest config-
urable address to 512. The unit is equipped with 3-pole XLR connections.
• Press [MENU] repeatedly until 001 shows on the display.
• Press ENTER button.
• Use UP/DOWN button to select the starting address.
• Press the button ENTER to save the setting.

3.11 DMX ADDRESSING

To able to operate the LASERCOMBY with a light controller, adjust the DMX start address for the first a
DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the first DMX
channel, adjust the start address 33 on the LASERCOMBY. The other functions of the light effect panel are
then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
Start address
DMX channels (example)
12 33
DMX Address: 33
DMX512 Controller
LASERCOMBY
DMX Address Next possible start
occupied address for unit No. 1
33-44
DMX Address: 45
Example 12 DMX channels configuration (12CH mode)
Next possible start
address for unit No. 2
45
DMX Address: 57
Next possible start
address for unit No. 3
57
DMX Address: 69
Fig.6
69
. . . . . . . . . . . .