Menu Structure; Automatic; Sound Mode Sensitivity Setting - ProLights LASERCOMBY User Manual

10

3.3 MENU STRUCTURE

MODE
Automatic Programs
Sound Sensitivity
Manual LED Control
DMX Addressing
Slave Mode
STANDALONE
This fixture has several options for operating without a DMX controller. Access these options via the con-
trol panel on the back of the fixture.

3.4 AUTOMATIC

This fixture has preprogrammed chases that may be triggered without a controller. Access these chases
via the control panel on the back of the fixture.
• Press [MENU] button repeatedly until [AuF], [AuS], [Sou] or [rdn] shows on the display.
• Press UP/DOWN button to choose [AuF] (for a fast show), [AuS] (for a slow show) or [rdn] (for a random
show).
• Press ENTER button.

3.5 SOUND MODE SENSITIVITY SETTING

• To enable the Sound-Active mode, press [MENU] repeatedly until [AuF], [AuS], [Sou] or [rdn] shows on the
display.
• Press UP/DOWN button to choose [Sou].
• Press ENTER button to confirm.
Turn the music on and adjust the microphone sensitivity knob until the product starts responding to the
beat of the music. To adjust the sound sensitivity of the Sound Active mode, do the following:
• Press [MENU] button repeatedly until [S 0] shows on the display.
• Press UP/DOWN button to choose between no sound activation and high sound activation [S 0 - S 9].
LASERCOMBY
PROGRAMMING STEPS
AuF
AuS
Sou
rdn
S 0 S 0 - S 9
rgb
(r 0 - r 9)
(g 0 - g 9)
(b 0 - b 9)
LEd
(Sr 0 - Sr 9)
FdE
(Sp0 - Sp9)
001 001 - 512
SLA
DESCRIPTION
Automatic Mode, Fast
Automatic Mode, Slow
Sound Active Mode
Random Effect Mode
Manually adjust the LED color and strobe rate
Manually adjust the LED color and strobe rate
Manually adjust the LED color and fade speed
Set DMX starting address
Sets Slave Mode