Connect Output Source; Connect Control Computer - RGBlink Q16pro Quick Start Manual

Connect Output Source

Q16pro Series supports SDI,DVI,HDMI,HDBaseT and other optional output modules.
Connect Q16pro-4 with monitors.

Connect control Computer

Q16pro series is operated by XPOSE,so it is necessary to connect device with control computer.
Method 1:Direct Connection:Connect Q16pro-4 with computer via network cable as shown in the figure below.It
is suitable for single user to control the device.
Method 2 ： Router Connection:Connect control computer and Q16pro-4 with Router as shown in the figure
below.It supports simultaneous online operation by multiple users.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
3