RGBlink Q16pro Quick Start Manual page 18

Quick
Quick is to set layer layout quickly.
1. Monitor：choose the monitor you would like to set
2. Source：Signal
3. Drop Area：Drag the source from the Signal List to the
Drop Area.Drag as many signals as you need, such as signal
1 and signal 2, into the drag area.
4. After setting,click <Set> to confirm and the layout will
be shown on the interface as shown in the right figure.
Stream
H.264 Module supports to preview image.
1. Turn on Layer Preview,Input Preview,Scene Preview or
Expand Preview according to the actual need.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
17