RGBlink. If the purchaser or a third party carries out modifications or repairs on goods delivered by RGBlink, or if the goods are handled incorrectly, in particular if the systems are commissioned operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon in the contract, all guarantee claims of the purchaser will be rendered invalid.
Operators Safety Summary The general safety information in this summary is for operating personnel. Do Not Remove Covers or Panels There are no user-serviceable parts within the unit. Removal of the top cover will expose dangerous voltages. To avoid personal injury, do not remove the top cover. Do not operate the unit without the cover installed.
Page 5
Unpacking and Inspection Before opening DXP H0404 processor shipping box, inspect it for damage. If you find any damage, notify the shipping carrier immediately for all claims adjustments. As you open the box, compare its contents against the packing slip. If you find any shortages, contact your sales representative. Once you have removed all the components from their packaging and checked that all the listed components are present, visually inspect the system to ensure there was no damage during shipping.
Chapter 1 Your Product 1.1 In the Box Power Adapter Power Cable Remote Control Note: AC Power Cable supplied as standard according to destination market. DXP H0404 User Manual...
1.2 Product Overview DXP H0404 is a true 4K HDMI Matrix Switcher which allows to route any of 4 HDMI sources to any 4 HDMI displays! The DXP H0404 4×4 HDMI Matrix switch is a complete HDMI routing solution for True 4K HDMI systems.
Page 8
Features: Connects up to 4 HDMI sources to 4 x HDMI display monitors. HDMI 2.0 with 3D, HDCP 2.2 & DVI1.1 Compliant. Ultra-high-definition video up to 4K 60Hz @ 4:4:4 18Gbps (6Gbps per color) Support HDR10, Dolby Vision, HLG ...
1.2.1 Front Panel Feature LED Status Description IR receiver Receiving IR remote signal Blue ON Power ON POWER Red ON Standby LCM Display Display operating status or Menu. Go up direction in Menu. UP Button Go down direction in Menu. DOWN Button Go left direction in Menu.
1.2.2 Back Panel INPUT HDMI HDMI input port 1~4 SPDIF SPDIF audio output port ~4 OUTPUT HDMI HDMI output port 1~4 External IR receiver CONSOLE RS232 command control / Firmware update RJ45 WEB control interface Power input DC JACK * In standby mode, IR remote cannot control matrix but power on matrix only Notice * Please press ENTER to execution any change of menu settings DXP H0404...
Chapter 2 Install Your Product 2.1 Plug in Signals Connect input signals and output display to the product before all devices are powered on. Tighten connector screws/locks where provided. 2.2 Plug in Main Power Connect IEC cable to device and plug into wall socket. Turn on power at wall socket. 2.3 Turn on Your DXP H0404 The device will enter to the boot interface, and OLED display will show as below.
Chapter 3 Use Your Product LCM Panel Function Power on Main Screen After power on, the main screen will show matrix name and version information. The matrix will back to main screen if no operations in 30 seconds 4 X 4 HDMI MATRIX Version V1.00 Channel Switching Press OUTPUT 1~4 to select HDMI output (multiple selections) then press INPUT 1~4 (single selection), press...
3.2 MENU Structure 3.3 Menu Operation Press UP or DOWN key to move * to select an item for setting and press ENTER key to enter into subpage. When the selected sub-page setting is completed, press the MENU button to return to the main page ...
Page 15
SAVE 1 2 3 4 SCENE#1 2H 3H 4A XA LOAD Reload saved scenes, press UP or DOWN to select the number and ENTER to load. It will show input number and status of audio selection. At main screen you could use IR01 remote button B to enter SCENE function, button 1~4 (input) to select port number to load.
Page 16
COPY MODE To fully support the TV resolution and audio mode, the matrix provides “copy mode” to copy TV EDID for input source reference. When use the copy mode, recommend copying the lowest resolution TV EDID. Otherwise it may cause no picture display if the TV resolution is not able to support higher resolution. After entering COPY MODE menu, press UP or DOWN button to select the OUTPUT (1 to 4) and press ENTER, then press UP or DOWN button to select the INPUT (1 to 4 or ALL) and press ENTER to confirm.
Page 17
IP Address default: 192.168.0.10 Subnet Mask This function can be setup MATRIX host intranet “Subnet Mask”, press the ENTER, the left-most number of second row will flash, then press the UP or DOWN button to change the numbers Press the ENTER, , press LEFT or RIGHT to move to another location, the move to a position number will flash, press ENTER to complete the setting.
Page 18
Media Type “Media Type, press the ENTER, the second row will flash, This function can be setup MATRIX host intranet then press the UP or DOWN button to select 10M, 100M, AUTO, press ENTER to complete the setting. Media Type 100M Media Type default:100M MAC Filter...
Page 19
REMOTE ID REMOTE ID default:4 + 3.3.6 Audio Select This function can set the output of SPDIF to HDMI (H) or ARC (A). OUTPUT 1 2 3 4 AUDIO H H H H 3.3.7 System Info Display DXP H0404 Matrix firmware version 1.MAIN V1.00 3.CPLD...
3.4 Remote Control Function 3.4.1 IR01 1. To command the matrix locally, setup the remote control IR01 ID with the same code of the Matrix (see 4.5). The default code is 4. (Power+4) 2. Warning: These settings have to be done the first time you use the IR01 or when you change the batteries. IR ID setup : press and hold POWER button , then press Number key Remote control button define Power on/Standby...
Page 21
A (for ALL) B (for SCENE) Output 1 Output 2 Output 3 Output 4 Input 1 Input 2 Input 3 Input 4 For example: to switch output port 1 to input port 4, press 1 (OUTPUT 1) and then press 7 (INPUT 4). * Under using quick key operation, LCM screen will jump to the output / input setting page;...
Page 22
3.4.2 CONSOLE DXP H0404 support RS232 and TCP/IP control by same command as below: For RS232 CONSOLE: Connect the RS232 CONSOLE port to the COM port of the host by a F/M RS232 straight cable (pin 2 to pin 2; pin 3 to pin 3, pin 5 to pin 5). Communication format is 9600,8, N, 1 (9600 bps, 8 data bits, no parity check, 1 stop bit) For Ethernet TCP/IP(Winsock) Default IP address: 192.168.0.10, Port:47011...
Page 23
IPADDRESS△[x.x.x.x] Set Matrix IP address SUBNETMASK△[x.x.x.x] Set Matrix subnet mask GATEWAY△[x.x.x.x] Set Matrix gateway MEDIATYPE△[z] Network speed select MACFILTER△[y] MAC filter on/off STATUS Show connection status VERSION Show firmware version HELP Help [Symbol] [Parameter] ------------------------- ------------------------------------------- 00=off, 01~04=1~4 00~09=0~9 0~255 00=off, 01=on 00=auto, 01=10M, 02=100M Example:...
3.5 Ethernet Control Initial IP Configuration Setup MATRIX IP Address same as your PC with same domains.(Default 192.168.0.10) MATRIX IP Address method, please refer. to “ETHERNET” Chapter Input IP Address on a web page, you could link to the Web UI of the MATRIX host. Web UI Operation SWITCH SETTING Power: Control MATRIX power on and standby.
Page 25
Advanced IP address: Change IP address Subnet mask : Change Subnet mask Gateway IP: Change Gateway IP Media Type : Change 10 / 100 / Auto detect DHCP Client : When setup at Enable, the MATRIX host will automatic get IP Address/Subnet ...
Page 26
Aliases Aliases page can change input/output name, enter Apply to finish the setting after change The new name will update and correspond to SWITCH SETTING page Output / Input. Press Back jump back to advanced page. DXP H0404 User Manual...
Page 27
MAC Filter MAC Filter can be setup as registered MAC Address to link MATRIX host Web UI,the max. up to 10 groups MAC Address After MAC Address fill in, select Enable and press Apply to complete the setting. ...
Page 28
Scene Save : Save 10 set of channel settings Load : Reload 1 of the channel settings Update: Refresh the status of Load Back : Back to Advanced page DXP H0404 User Manual...
6.2 Terms & Definitions The following terms and definitions are used throughout this guide. “ASCII”: American Standard for Information Interchange. The standard code consisting of 7-bit coded characters (8 bits including parity check) used to exchange information between data processing systems, data communication systems, and associated equipment.
Page 33
light. Benchmark color temperature for the A/V industry include 5000°K, 6500°K, and 9000°K. “Contrast ratio”: The radio of the high light output level divided by the low light output level. In theory, the contrast radio of the television system should be at least 100:1, if not 300:1. In reality, there are several limitations.
Page 34
compression, storage and transmission of moving image information such as motion video, CD-quality audio, and control data at CD-ROM bandwidth. The MPEG algorithm provides inter-frame compression of video images and can have an effective compression rate of 100:1 to 200:1. ...
Page 35
“SDI”: Serial Digital Interface. The standard based on a 270 Mbps transfer rate. This is a 10-bit, scrambled, polarity independent interface with common scrambling for both component ITU-R 601 and composite digital video and four channels of (embedded) digital audio. ...
6.3 Revision History The table below lists the changes to the Video Processor User Manual. Format Time ECO# Description Principal V1.0 2019-8-22 0000# Release Fanny DXP H0404 User Manual...