RGBlink Q16pro Quick Start Manual page 21

Preset Name
Select a bank and click Preset Name,fill in the blank after
New Preset Name to rename a Preset (Bank)
Click the color block after Color Selection and choose a new
color for the boarder of chosen bank.
Click<Script>,fill in the file name and click "Save",the file can
be seen in the <Load Script>
Click"Load" to load the file into XPOSE.
Click"Delete" to delete saved script.
Hotkey
2、Schedule Mode
This mode is designed to set auto bank (scene/preset)
switch.
Steps are as follows：
1. Choose the BANK
2. Fill in the "Start Time" and "End Time"
3. Turn on Daily Loop，and click "OK"
4. Click to edit and
5. Turn on "Loop Switch"
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
to delete.
20