RGBlink Q16pro Quick Start Manual page 19

2. Turn on H.264,and users can preview the image as
shown in the right figure.
Note: H.264 is the master switch. If the user turns on H.264 first, it cannot be set successfully.
Background
Q16pro's modules which supports background set are as
follows:
● 2K DVI Output Module（with OSD and background）
● 2K HDMI Output Module（with OSD and background）
Order Codes of modules refer to 4.2
Operation steps are as follows：
1. Turn on Edit Status；
2. Click "Browse" to choose picture.
3. Position：fill in the X/Y and Width/Height.
4. After settings,click"Set" to confirm and click"Clear
Image" to clear the image if needed.
5. After click"Set",the background is set successfully
when red progress bar at the bottom of the interface
turns to green.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
18