RGBlink Q16pro Quick Start Manual page 15

Group
When enter Layer Management interface, the window is
blank. The screen group created in Display System shall be
dragged from the Group.
Signal
Signal list, showing all input signals and resolutions currently.
Drag the signal to the display.
click ,users can rename the input signal and then click
to confirm.
Audio
Q16pro supports Audio Input/Output Module,which should
be inserted into the slots supporting both input&output
module.
1. Select a bank you would like to add audios;
Every bank and every layer can be added different audio
inputs&outputs.
2. Drag audio inputs from "Signal List"to audio outputs as
shown in the right figure;You can also drag a new audio input
to replace the previous one.
The relation between audio input and output is unique;
3. Click left mouse to adjust the volume in "volume
bar"shown in the audio output.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 | support@rgblink.com | www.rgblink.com
14