Fbt VAIE 7M00 Series Instructions For Use Manual page 85

Label Application
System confi guration
System
Standby amplifi er
Local emergency Local emergency
Emergency units Emergency units
VAIE 7M00
See panel
37
Notes
In this panel the following are set:
- VAIE ID address (0 to 5).
- Number of VAIEs in the system.
- Attribution of standby amplifi er.
The total number of amplifi ers
present in the system is also
shown automatically.
Panel for setting the default
broadcasting zones for emergency
messages. The situations of all
the VAIEs present in the system
is shown. Use the Up and Dn and
arrow keys to move through the
table. For the remote racks, the
values selected refer to all the
zones.
Press 'Change' to change the
zone status, choosing between:
blue = active zone and
red = inactive zone
To leave this screen, press
'Escape'.
From this panel it is possible to
use the sub-menus to set the
confi gurations of the emergency
units connected to the VAIE.
To confi gure the FMD range
emergency units, press 'Set
unit with keys', then press the
'Change' key to select the model.
Then press 'Edit key' for
confi guring the keys.
Use the '<<' and '>>' keys to pass
from one key to another of the
unit. Move over the table using the
< and > keys and the Up/Dn keys.
Press 'Change' to change the
association of the zone with the
key, choosing between:
Blue = Zone associated
Red = Zone not associated
To leave the screen, press
'Escape'.
The item 'Set unit with touch
screen' refers to the presence of
the TSC6000-EN touch screen
unit.
EN