Fbt VAIE 7M00 Series Instructions For Use Manual page 74

EN
set> MONITOR SPEAKER
set> AUX, CHIME
VAIE 7M00
Management of monitor speaker
On this panel, in addition to adjusting the
volume of the monitor speaker on the
VAIE, it is possible to enable sounding
of the input and output signals of the
equipment.
The Source Monitor Speaker screen
enables one of the input sources to be
played back, while the Zone Monitor
Speaker enables one of the output zones
to be played back.
The Play Alarm Messages key enables
access to the screen page where it is
possible to listen via the monitor speaker
to the pre-recorded messages stored
in the VAIE's internal memory. Press
'Change' to browse through the various
messages, 'PLAY' to start playing and
'STOP' to stop it.
Management of AUX and CHIME inputs
Confi guration of the auxiliary input and of the chime is accessed from this panel.
Aux input confi guration
On this screen the confi guration of the
auxiliary input can be set, selecting the
Mode, the hold-on time for VOX at the end
of a call and the Priority Level of a call.
Using the Edit zone button, another
screen page is accessed where the call
zones can be selected upon activation
of the AUX input, using the arrow and
Up/Dn keys.
Chime confi guration
On this screen, chimes for calls
coming from emergency stations,
from broadcasting stations or from the
precedence contact can be enabled or
disabled independently.
26
Sources available for selection
Local mic / MP3
Emergency units
Link A input
Link B input
Broadcast unit
Music source
Aux source
Ext1 to Ext6 source
Speaker monitor off
Selectable zones
Output on zone X
Speaker monitor oFF
Mode
Aux input off
Input VOX level 1÷7
Aux input on
Aux with prec. +
Aux with prec. –
Precedence modes also require
appropriate setting of the P+/P- jumper
on the CPU board.
Hold on
0 / 1 / 2 / 4 / 8 / 16 sec.
Priority level
1÷7
Chime on emergency unit (on/off )
Chime on broadcast unit (on/off )
Chime on precedence (on/off )