Fbt VAIE 7M00 Series Instructions For Use Manual page 77

Label Category subject to diagnosis
Primary and secondary power
Power supplies
supplies
Control input Local input contacts
Communication Internal communication of VAIE
report> BATTERY
report> IMPEDANCE
VAIE 7M00
See panel
Status of batteries
This panel displays all the data relating to the internal batteries of the VAIE.
The equipment carries out testing of the batteries automatically approximately
once an hour. It is in any case possible to start an immediate test manually
by pressing the 'Test' key. If the batteries have not been fi tted, the only values
detected will be the power supply voltage and the temperature.
To return to the INSPECTION menu, press Escape.
Impedance of the lines
Panel for checking the impedance values measured in real time compared with
the value stored during the start-up (see page 35).
If the tolerance is exceeded, the fault will be reported in the relevant menu
together with a too high, too low or short-circuit impedance value.
To return to the INSPECTION menu, press Escape.
29
Notes
The diagnosis status is
reported for each monitored
element.
The diagnosis status is
reported for each monitored
element.
The diagnosis status is
reported for each monitored
element.
EN