EN
set> ALARM LEVELS
set> EMERG. LEVELS
set> ZONE EQUALIZER
set> RACK CONFIG.
VAIE 7M00
Setting the alarm source level
Panel for setting the output volume of the alarm sources connected to the
VAIE 7M00.
- Emergency units.
- Hand-held paging local microphone.
- LINK input (connection with other VAIEs).
To return to the CONFIGURATION menu, press Escape.
Setting the zone volume level during emergencies
Panel for adjusting the zone volume during emergencies.
To return to the CONFIGURATION menu, press Escape.
Equalisation of the zone tones
Panel for equalising the bass, mid-range and treble tones in each output zone.
To return to the CONFIGURATION menu, press Escape.
Rack confi guration
This panel contains all the parameters needed for confi guring the rack:
- System.
- Emergency messages to broadcasting zones.
- Emergency unit.
- Controlled inputs.
- Outputs.
- Battery charger.
- Local unit.
Note that any changes whatsoever to any of the sub-panels illustrated on the
following page must be saved by pressing the Save button.
To return to the CONFIGURATION menu, press Escape.
36