Fbt VAIE 7M00 Series Instructions For Use Manual page 81

set> CLOCK
set> Firmware Version
Use the < INSPECTION > and <CONFIGURATION> key to access the relevant menus.
!
N.B.:
Upon completion of the operations carried out, before returning to the basic level, that is to say to the MUSIC MENU,
it is advisable to log out of the system level corresponding to the current menu, so as to reset the required password
for future accesses and to prevent unauthorised personnel from accessing the advanced functions of the system
To do this, select Exit> Logout from the list in the OPERATOR menu: the system returns to its basic level and shows the
MUSIC MENU panel. The request for the login password will be reset also for any other levels visited. Otherwise, after 5
minutes without any keys being pressed, the system will automatically reset the password.
VAIE 7M00
Setting of system date and time
Panel for setting the system date and time.
Press the following buttons:
- Set date (date)
- Set time (hour) and
- Set cal. (calibration)
to set these parameters.
To return to the OPERATOR menu press 'Escape'.
After setting the desired date, press 'Save date' before pressing 'Escape' to exit.
After setting the desired time, press 'Save time' before pressing 'Escape' to exit.
The Clock Calibration window enables fi ne setting of the clock.
It is advisable to check the diff erence in seconds compared with a high-precision
clock after a couple of days. Calculate the diff erence in parts per million (over or
under) and enter the result by means of the 'PPM correction' keys.
Then press 'Save' to save the setting.
Press 'Escape' to exit.
Viewing the fi rmware version
Panel for viewing the version of the fi rmware installed in the VAIE system.
To return to the OPERATOR menu press 'Escape'.
33
EN