Fbt VAIE 7M00 Series Instructions For Use Manual page 70

EN
D3) >> Local emergency
D4) >> Control input
Screen page for managing the inputs being controlled (1 to 7).
Use the 'Next' and 'Prev.' Keys to move from one input to another.
Mode Setting of the operating mode of the input (message, reset or de-activated) and of the relevant zones
(only if the item "Message input" is selected).
Control Enabling/disabling of control of the selected input.
Logic Setting of the logic for input activation.
Trans Enabling of the level or transition input.
D5) >> Output
D6) >> Charger
Battery capacity
Press 'Change' to select the 40 Ah value. Please see page 39 for details.
Energy save (enabled/disabled)
For enabling/disabling the function allowing the batteries to go into the energy saving mode in the absence of the
mains power supply.
!
N.B. In order to comply with the regulations, the "Energy save" function should always be enabled.
VAIE 7M00
Screen page for setting the zones in which the emergency messages will be
broadcast. The panel shows the situations of all the VAIEs present in the system.
Move in the table using the arrows and the Up and Dn keys.
The zones selected in this window are called up directly on pressing the EVAC /
ALERT / PTT keys if no selections are made in the emergency menu.
Blue = Active zone / Red
Screen page for setting the outputs (1 to 3).
Use the 'Next' and'Prev.'keys to move from one output to another.
On selecting the item >>Charger this screen page containing information about
the internal batteries appears.
22
= Inactive zone