Audio Streaming - oticon Chili Fittings Manual

Audio Streaming

Streamer can receive audio signals from radio, PC, MP3 players
or other devices, assuming the paired devices are within range
and turned on.
Audio sources using Bluetooth (A2dP) can be paired to
Streamer to stream music etc. wirelessly. Other audio sources
can be connected by means of the Audio Cable. Communica-
tion from Streamer to the hearing instruments will always be
wireless.
Wireless Audio input
Music from a stereo Bluetooth device is connected to Streamer
when:
— the two devices are paired
— inside the Bluetooth range (10 meters)
Note! This feature is only available in Streamer 1.3 or later.
To upgrade Streamer firmware to a later version please see
page 89 – 90.
58 OticOn chili FITTInG GuIde
Stop wireless audio streaming
The audio streaming is ended by pressing Streamer's Audio
button or the stop button at the music player.
Wired Audio input
When the jack wire connects from an audio player to Streamer,
Streamer will start streaming sound after the Audio button is
pressed.
Stop audio streaming
When the jack is removed or the Audio button pressed, audio
streaming is stopped.
Accepting phone calls during audio streaming
(wired or wireless)
If a phone call is accepted while the audio signal is activated,
the phone call will have priority.
When the phone call is over Streamer will automatically return
to audio streaming.
59