Audio Streaming - oticon Acto Complete Manual

The call is now directed into the hearing instruments. Talk in
direction of the microphone on Streamer. The red status indi-
cator on the Phone Adapter flashes during the call.
Hang up
Press Streamer's Phone button shortly. Streamer hangs up the
call, the green rim light turns off and the hearing instruments
return to the previous program.
— The red status indicator on the Phone Adapter switches
to constant light.
Make a call
1. Press Streamer's Phone button shortly (or shortly press the
red Phone button on the Phone Adapter). You will now hear
the dial tone in the hearing instruments. The green rim light
shows constant light in Streamer's Phone button.
86 OticOn ActO FITTING GUIDE
2. Pick up the phone/phone Receiver and dial the phone
number.
3. Put the phone Receiver back down.
— The red status indicator on the Phone Adapter flashes
during the call.
Hang up
Press Streamer's Phone button shortly. Streamer hangs up
the call and the green rim light turns off and the hearing
instruments return to the previous program.
— The red status indicator on the Phone Adapter switches
to constant light.
Make sure that the phone is turned off, or the Receiver is
back on!

Audio Streaming

Streamer can receive audio signals from radio, PC, MP3 players
or other devices.
Audio sources using Bluetooth (A2DP) can be paired to
Streamer to stream music etc. wirelessly. Other audio sources
can be connected by means of the Audio Cable. Communica-
tion from Streamer to the hearing instruments will always be
wireless.
Wireless Audio Input
Music from a stereo Bluetooth device is connected to Streamer
when:
— the two devices are paired
— inside the Bluetooth range (10 meters)
When the music player (or other stereo audio source) is turned
on, streaming is automatically started via Streamer and played
in the hearing instruments.
Starting wireless audio streaming
Audio streaming can always be started from Streamer with
a long push on the Audio button. If no TV Adapter has been
paired to Streamer – then a short push on the Audion button
will also start streaming.
Note! This feature is only available in Streamer 1.3 or later.
To upgrade Streamer firmware to a later version please see
page 89 – 90.
Stop wireless audio streaming
The audio streaming is ended by pressing Streamer's Audio
button. The hearing instruments will return to the General
program (P1).
Wired Audio Input
When the jack wire connects from an audio player to Streamer,
Streamer will start streaming sound after the Audio button is
pressed.
Stop audio streaming
When the jack is removed or the Audio button is used to end
the audio transmission, the hearing instruments will return to
the General program (P1).
87