Table of Contents
Advertisement
Wearing Streamer
Streamer should be worn with the neck strap. This enables
handsfree operation and undisrupted sound quality.
Battery
Streamer has a built-in rechargeable battery. The battery will
last up to 8 hours when audio streaming is active.
When the Connect function is active the battery will last for
60 hours. The battery indication will start blinking when the
battery is close to empty (about 5 minutes left) and an audible
signal will be sent to the hearing instruments.
Recharging the battery from empty takes approximately
4 hours. Streamer will work while being charged. When fully
recharged the battery indicator lights solid green.
Note: The green light disappears when Streamer is
disconnected from the charger.
60
OticOn chili FITTInG GuIde
Key lock
You can lock the keys to avoid unintended activation of the
buttons. The slider button on the top of Streamer locks and
unlocks the keyboard. This will also turn off the blue Connect
indication and reduce the other indicators light intensity.
important! how to use the neck strap
As a safety device, the neck strap has a plastic shell that
automatically breaks if the strap gets caught in anything.
This safety shell is nOt a lock, and under normal use will
not be broken.
If the safety shell is separated or broken, the neck strap
must be replaced.
do not shorten or modify the neck strap in any way,
for example, do not tie a knot in it to shorten it.
Streamer Firmware upgrade tool
how and when to upgrade Streamer
Please note! It is only recommended to upgrade a Streamer
for the purpose of providing additional client benefits.
If a client has a well functioning ConnectLine system an
upgrade is not advised.
Selecting "Streamer Firmware upgrade" in the tools menu
gives access to upgrade a Streamer to the latest available
version, without losing existing pairings.
connecting Streamer to the Pc
1. Please follow the instructions in Genie carefully.
2. Connect the large end of the uSB cable to an available
uSB port on the computer.
3. Press and hold the up button on Streamer,
4. Connect the small end of the uSB cable to Streamer.
When Streamer is connected, the current firmware version
in Streamer is displayed and whether this firmware can be
upgraded to a newer version.
In the bottom of the upgrade window there is a link to
"upgrade Information". This will open a .pdf with up-to-date
information about the differences between Streamer FW
releases on the market today. The document also has an
overview of the different push button functions in the latest
release.
61
Advertisement
Table of Contents
