Receiver Unit - Delta DE212 Installation And Operation Manual

3.3 Receiver unit

Antenna
Charge contacts
Right
Left
Charge station
CODE button
CH, Charge, Yellow light
ON, Green light
NOTE: Drawings and Photos may differ slightly from reality.
The receiver front has a charging station for the transmitter unit, two LED indicators and one
push button marked "CODE".
The energy charged to the battery, is calculated according to the time the transmitter has
been used.
This will ensure high capacity and reduced overcharging of the battery.
The CH LED has three stages when the transmitter is placed to charge:
1: CH is dark. No action.
2: CH burns continues. Full charge current.
3: CH flashes. Indicates trickle charging, battery is full according to the last duration of use.
The green LED, marked ON, indicates that a correct voltage is supplied and the receiver is
ready for operation. When coding the receiver and transmitter, this green LED flashes three
times when the code is accepted and stored in the receiver.
When the receiver is in operation, receiving an accepted telegram from transmitter, the
yellow CH LED is flashing rapidly.
D RC AS Page 14 of 33
ELTA
Document no: 03039