Table of Contents
Advertisement
Quick Links
Monitor Desk Mount Instruction Manual
V3.0
Model: EGCM7
Thank you for choosing this ErGear product! At ErGear we
strive to provide you with the best quality products and
services in the industry. Should you have any issues, please
don't hesitate to contact us.
Technical Support:
1-800-651-9525 Mon-Fri 10am - 5pm (PST) (USA) (CAN)
Other Info:
support@ergear.com(US)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ErGear EGCM7
Summary of Contents for ErGear EGCM7
- Page 1 Monitor Desk Mount Instruction Manual V3.0 Model: EGCM7 Thank you for choosing this ErGear product! At ErGear we strive to provide you with the best quality products and services in the industry. Should you have any issues, please don't hesitate to contact us.
- Page 2 If your monitor VESA is greater than 100x100 mm/4x4 in. or less than VESA 75x75mm/3x3in., this mount is NOT compatible. If this desk mount is NOT compatible, please contact customer service at support@ergear.com to find a compatible product. Tool Need（Not Included） Phillips 1/2 in.(13mm) - 1 in.(25mm)
- Page 3 Product Support line at 1-800-651-9525 or customer service at support@ergear.com. • Please note: Not all hardware included in this package will be used. Supplied Parts and Hardware for Step 1...
- Page 4 Step 1 Install the Pole to the Desktop Option A: Desk Clamp Assembly Small Allen Large Allen Key...
- Page 5 Option B: Grommet Base Assembly If there is no grommet hole on your desk, position the pole (01) on the mounting surface and mark the hole. Drill a hole using the drill bit in a diameter of 7/16in.(11mm)-33/64in.(13mm) at the marked position through the mounting surface.
- Page 6 Step 3 Secure the Moitors to Swivel Arms Phillips Secure 2 pcs bolts into the Screwdriver top VESA holes on the back [Not Included] (If needed) (If needed) of the monitor manually. 3 in. (75mm)x3 in. (75mm) 4 in.(100mm)x4 in.(100mm) Alternate TV1/TV2 Spacer...
- Page 7 Step 4 Adjust the Monitor Position Slightly Adjust the Height of the Monitor Large Large Allen Key Allen Key Turn the preassembled bolt [S] clokwise or counter-clockwise to adjust the monitor up or down Step 5 Cable Management and Angle Adjustment Tilt Adjustment Tilt Adjustment Slightly loosen the set bolt...
- Page 8 Thank you again choosing this ErGear product! All of us at ErGear do appreciate your product purchase. We hope that you are as happy with your product as we designing and manufacturing it for you. We strive to provide you with the best quality products and services in the industry.
Need help?
Do you have a question about the EGCM7 and is the answer not in the manual?
Questions and answers