Unpacking the DirectRay Hardware Components
Unpacking the DirectRay Detector
February 5, 2004
3-2
NOTE: Save all packing materials, in case you need to return the DirectRay Detector to Direct
Radiography Corp.
To unpack the DirectRay Detector:
1. Open the box and remove the packing insert.
2. Remove all of the other packing material covering the inner box in which the
Detector is packaged.
Open box and remove
top packing insert
GS20_414.cdr
Remove packing inserts
and phase change material
(shown here in gray)
GS20_415.cdr
FFDM-S Service Manual