Configuration On "3/4-Channel Portable Measuring Instrument - Parker SCMA-VADC-600 Operating Instructions Manual

3.2 Configuration on "3/4-channel portable measuring instru-
ment"
Please take note of the sample values table before the initial
commissioning.
NOTICE
The desired measurement range must be set using the dial on
the current/voltage converter. A sensor must be connected to
the Sensor port on the current/voltage converter.
1 On the "3/4-channel portable measuring instrument", select the AUX.
SENSOR choice from the SET menu.
2 In the menu option AUX. SENSOR, select the channel you want to
configure where the current/voltage connector is connected.
 Under the UNIT option, set the unit and the begin and end values to
specify how the corresponding signal will be shown on the display.
4 Under the SIGNAL option on the portable measuring instrument, set
the unit and the begin/end values for the signal type.
42