Protek 3201 User Manual page 40

☞ Press the following key sequence to load or recall a setup from memory
a) To recall a setting
Select the memory location (see sect 6.1
b) To save a setting
Select the memory location (see sect 6.1
6-3 Title name
A title name with up to 10 alphanumeric characters may be assigned to a display setup.
To enter a title name use the following procedure.
[1] Press the
F1
LCD screen. The alphanumeric character entry cursor will appear at the top middle of
the LCD screen as a reversed contrast block.
[2] The Characters for the title name are selected with the
[3] Press the F1
to the next character position. Numerical characters may be entered with the numeric keys.
Up to 10 alphanumeric characters may be used for a title name.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
)
)
Key to highlight the
key to select the desired character and to advance the character cursor
FAX 781.665.0780 - TestEquipmentDepot.com
F3
Load ⑤
F2
Save
icon located on the bottom left side of the
NAME
Keys or the rotary dial.
F4
End
F4
End