CB1200 INS
15
Service Repair Tools
1 . MULTIMETER
Used for taking volt reading or doing continuity tests.
2 . MAGNEHELIC OR DIGITAL VACUUM GAUGE
Used for taking firebox vacuum readings in inches of water column. Range of the gauge needs
to be from zero to .50 inches of water column. A vacuum hose and a "T" will also be needed.
3 . HAND TOOLS
Phillips and flathead screwdriver, 11/32 inch nut driver, SAE Allen wrench set, and SAE socket
set.
4 . TEST BOX
Needed for checking the wire harness and components
5 . VACUUM CLEANER
Needed to clean firebox, heat exchanger, blowers, and venting.
6 . MICRO CLEANING KIT FOR VACUUM CLEANER
This is an attachment kit for cleaning the "hard to reach" areas.
32
250-7700B
February 13, 2019