Download Print this page

Insignia RW103 Installation Manual page 4

Advertisement

Electrical Requirements Model No RW103/RW104
Always consult a qualified Electrician before connection as to suitability
Your electrical contractor will understand ALL legal requirements of connection before undertaking any work or
UNDER NO CIRCUMSTANCES UNDERTAKE THIS YOURSELF WITHOUT CONSULTATION
Note for electrician: This product comes with pre-fitted RCD unit. We leave it this way for you to connect it your own
way due to continued additions to current regulations.
1) Connect within current laws and IP directives. Subject to room location.
2) (Preferred) Wire into isolated fused feed connecting directly to the house consumer/service box.
Always use protection against electrical surge. Your shower should be treated the same as a home computer. A surge
protector should eradicate the possibility of either the transformer or control panel being burnt out.
Subject to connection type, electrical work needs to be signed off by a fully qualified operative by law. Failure to
adhere to this will not only void your electrical warranty for your sauna, but could void your house insurance
www.insigniashowers.com
Voltage Rating
220-240AC
Frequency Rating
50Hz
Power Rating 2700 watts
Amperage : 11.25 Amps
installation.
Last Modified: 07/10/2021
Tools Required
Scissors
Knife
Spirit Level
Tape Measure
Philips Screwdriver
Electric Drill
Safety Gloves
Safety Glasses
04

Advertisement

loading

This manual is also suitable for:

Rw104