To connect to the console
1. Turn off power to the gateway.
2. Connect the supplied null-modem cable (console cable) to the console
Figure 9 Console Port
3. Connect the other end of the cable to a system running a
Nokia 50i Installation Guide
port:
The console port is located on the front of the gateway.
Use only the DB-9 port labeled Console; the serial port AUX is an
auxiliary modem port.
If you connect the console port to a data-communications equipment
device, use a straight-through cable.
For cable pin assignments for the console connection, see
page 41.
terminal-emulation program.
Performing the Initial Hardware Configuration
00024
Console port
Figure 14
on
33