Nokia 50i Installation Manual page 32

3
Performing the Initial Configuration
Caution
Nokia recommends that you use the console cable that was
delivered with your gateway for your console connection. Otherwise,
ensure that the pin assignments for your cable match those provided
in this section.
Note
Although pin assignments are the same for console and serial
connections, they are used differently by the gateway. Therefore, do not
use these two connectors interchangeably.
Use an ASCII terminal or a computer with terminal emulation software for
console communication.
The following terminal settings are required to communicate with the
gateway by using the console port:
! Baud rate
Data bits
!
Parity
!
! Stop bit
Flow control
!
32
9600
—
8
—
none
—
1
—
none
—
Nokia 50i Installation Guide