Table of Contents
Advertisement
No.:GC-JS-21
3.6 Feet adjustment
The height of the feet has been adjusted when the equipment leaves the factory. If the installation
surface is flat, no adjustment is needed; if the surface is uneven, the feet of the sterilizer should be
adjusted to make the sterilizer roughly flat.
3.7 Insert the power plug into the socket.
Make sure that the equipment is reliably grounded.
3.8 Other considerations
After the device has been transported and stored in an environment below 2 ° C. The
equipment must be placed in an environment with a temperature not lower than 5 ° C for
2 hours before operation. This kind of situation usually occurs in winter, and the freezing
of water in the equipment pipeline may cause equipment failure.
Version: 01/00
Effective date：2020-03-30
14
Advertisement
Table of Contents
