Advertisement
Step 3
Using a Phillps screwdriver remove two (2) screws on
each side from the axle lock nut cover.
Step 5
Reverse the steps.
• Reposition the deck and attach with the screws that were removed in Step 1.
ATTENTION: Charge battery 8 hours before using.
Need Help? Visit our website at www.razor.com or call toll-free at 866-467-2967 Monday - Friday 8:00am - 5:00pm Pacific Time.
Step 4
Using two (2) 19 mm wrenches, loosen the lock nuts from
the axle. Slide the wheel down and pull the wires from the
battery compartment.
2
Advertisement
