Connecting To The Port Replicator; Attaching To The Port Replicator - Gateway 600YG2 User Manual

Connecting to the port replicator

You can attach your notebook to the port replicator while your notebook is
off, on, or in Standby mode.

Attaching to the port replicator

To attach your notebook to the port replicator:
1
Connect external devices to the ports on the port replicator.
2
Align the connector holes on the bottom of your notebook with the
docking posts on the port replicator.
3
Press down on the notebook until it snaps into place.
Caution Press down on the outside edges of the notebook. Do not
press in the middle or you may damage the LCD screen.
www.gateway.com
Connecting to the port replicator
263