Changing Batteries; Replacing The Main Battery - Gateway 600YG2 User Manual

Changing batteries

If your notebook is plugged into an AC outlet or if it has a charged secondary
battery installed, you can change the main battery while the notebook is turned
on. If your notebook has only one battery and it is not plugged into an AC
outlet, you must turn the notebook off while changing the batteries.
Warning

Replacing the main battery

To replace the main battery:
1
If your notebook is on and is plugged into an AC outlet or has a charged
secondary battery installed, go to Step 2.
-OR-
If your notebook is on and is not plugged into an AC outlet and does not
have a charged secondary battery installed, save your work and turn off
the notebook.
2
Close the LCD panel.
3
Disconnect your notebook from the optional port replicator (see
"Disconnecting from the port replicator" on page 264).
4
Turn your notebook over so that the bottom is facing up.
Danger of explosion if battery is incorrectly replaced.
Replace only with a Gateway 600YG2 battery. Discard
used batteries according to the manufacturer's
instructions.
The battery used in this device may present a fire or
chemical burn hazard if mishandled. Do not disassemble,
heat above 212°F (100°C), or incinerate. Dispose of used
battery promptly. Keep away from children.
www.gateway.com
Changing batteries
151