Updating Device Drivers - Gateway 600YG2 User Manual

Updating device drivers

The Restoration CDs contain a device driver update utility that works over the
Internet. If you do not have an Internet service provider, the update utility
works by direct-dialing the device driver update service.
Important
To update device drivers:
1
Insert the red Gateway CD into the DVD or recordable CD drive. If the
program starts automatically, go to Step 5.
- OR -
If the program does not start automatically, go to Step 2.
Important
2
Click
Start
3
In the
Open
the DVD or recordable CD drive).
4
Click .
OK
If your system came equipped with a wireless device, only
use the drivers approved for the country the device will be
used in. See the red Gateway CD or the Gateway
Technical Support Web site (www.gateway.com/support).
If your system came equipped with an internal embedded
wireless device, see "Safety, Regulatory, and Legal
Information" on page 295 for general wireless regulatory
and safety guidelines.To find out if your system has an
internal wireless device, check the label (see "Identifying
your model" on page 12).
If the drive you want to use is not in the modular bay, you
need to swap modules. For more information about
swapping modules, see "Changing drives" on page 246.
, then click . The Run dialog box opens.
Run
text box, type d:\runmenu.exe (where d is the drive letter of
www.gateway.com
Updating device drivers
235