Restarting (Rebooting) Your Notebook - Gateway 600YG2 User Manual

Restarting (rebooting) your
notebook
If your notebook does not respond to keyboard or touchpad input, you may
have to close programs that are not responding. If closing unresponsive
programs does not restore your notebook to normal operation, you may have
to restart (reboot) your notebook.
To close unresponsive programs and restart your notebook:
1
Press C
TRL
is not responding.
2
Click the program that is not responding.
3
Close the program by clicking
4
If your notebook does not respond, turn it off, wait ten seconds and turn
it on again.
Important
As a part of the regular startup process, a program to check the disk status
runs automatically. When the checks are finished, Windows starts.
+A +D . A window opens that lets you close a program that
LT EL
If your notebook does not turn off immediately, complete
the following steps until the notebook turns off:
1 Press and hold the power button for about five seconds,
then release it.
2 Insert a straightened paper clip into the reset hole on
the bottom of your notebook.
3 Remove AC power and the batteries for more than
10 seconds.
www.gateway.com

Restarting (rebooting) your notebook

.
End Task
25