Pc Cards; Power - Gateway 600YG2 User Manual

Chapter 17: Troubleshooting

PC Cards

You installed a PC Card and now your notebook is having problems
Make sure that you have correctly installed required software for the
PC Card. For more information, see your PC Card's documentation.
Make sure that the PC Card you installed is not causing a system resource
conflict. For more information on resource conflicts, see "Device
installation" on page 272.

Power

Your notebook is not working on AC power
Make sure that your AC power adapter is connected correctly to your
notebook. For more information, see "Connecting the AC adapter" on
page 20.
If your notebook is plugged into a surge protector, make sure that the surge
protector is connected securely to an electrical outlet, turned on, and
working correctly. To test the outlet, plug a working device, such as a lamp,
into the outlet and turn it on.
Make sure that the AC power adapter cables are free from cuts or damage.
Replace any damaged cables.
Your notebook is not working on battery power
Make sure that the main battery is installed correctly. For more
information, see "Changing batteries" on page 151.
Make sure that the optional secondary battery is installed correctly. For
more information, see "Installing a secondary battery" on page 153.
Make sure that the batteries are fully recharged. For more information, see
"Recharging the battery" on page 149.
Make sure that the battery is calibrated correctly. For more information,
see "Recalibrating the battery" on page 150.
Your notebook will not turn off, even after pressing the power button
for five seconds
If your notebook has "frozen," and pressing the power button for five
seconds does not turn it off, insert a straightened paper clip into the reset
hole on the bottom of your notebook. For the location of the reset hole,
see "Bottom" on page 8.
286 www.gateway.com