Wall mounting (only for type SH)
Fitting collector supports, adjusting angle of inclination
7
6
Fig. 14
Trim the adjustable support according to the
required angle of inclination (see Fig. 12).
Installing the collectors
Installation information:
■
Gusset plate with circular hole at top
■
Gusset plate with slot at bottom
Screw the joining plate onto the retaining brackets
■
between the 2nd and 3rd collector support and
between the 4th and 5th, etc. (see following dia-
gram).
16
(cont.)
1.
2.
8
γ