Gateway Profile Profile 5 User Manual page 111

3
Click to select the access point network in the
. A Linksys Properties dialog box opens. The name of the network already
Properties
appears in the
Network name (SSID)
4
Click the arrow button to open the Data encryption list, then click
5
If the WEP network key is not provided automatically, click to clear
for me automatically
and
Confirm network key
- OR -
If the WEP network key is provided automatically, then leave the check mark in
key is provided for me automatically
6
Make sure that the
check box is not selected.
are not used
7
Click to close the Wireless Network Properties dialog box. Your network should be
OK
running. Go to "Testing your network" on page
Help and
Support
box.
check box, then type the network key settings in the
boxes to match those set on the access point.
check box.
This is a computer-to-computer (ad hoc) network; wireless access points
For more information about configuring a wireless network, click
Start, then click Help and Support.
Type the keyword wireless network in the Search box
www.gateway.com
Preferred networks
111.
, then click the arrow.
list, then click
.
WEP
The key is provided
Network key
The
105