Gateway Profile Profile 5 User Manual page 113

3
Click . The Linksys Properties dialog box opens.
Add
4
Type the name of the network in the
5
Click the arrow button to open the
authentication option you want.
6
If this is a security-enabled network, click the arrow button to open the
list, then click
WEP
7
If the WEP network key is not provided automatically, click to clear
for me automatically
and
Confirm network key
- OR -
If the WEP network key is provided automatically, then leave the check mark in
key is provided for me automatically
8
Make sure that the
check box is not selected.
are not used
9
Click to close the Wireless Network Properties dialog box. Your network should be
OK
running. Go to "Testing your network" on page
Network Authentication
.
check box, then type the network key settings in the
boxes to match those set on the access point.
check box.
This is a computer-to-computer (ad hoc) network; wireless access points
www.gateway.com
Network name (SSID)
list, then click the network
111.
box.
Data encryption
The key is provided
Network key
The
107