Opening the case
Your computer case provides easy access to internal components.
Warning
Removing the side panel
To remove the side panel:
1
Follow the instructions in
2
Shut down your computer, then disconnect the power cord and modem, network,
and all peripheral device cables.
3
Press the power button to drain any residual power from your computer.
4
Remove the two thumbscrews from the side panel, then swing the back of the side
panel away from the computer.
To avoid exposure to dangerous electrical voltages and moving parts,
turn off your computer, then unplug the power cord, modem cable,
and network cable before opening the case.
"Preventing static electricity discharge" on page
Thumbscrews
www.gateway.com
Opening the case
50.
51