Gateway 300X User Manual page 89

Example router-based Ethernet network
The following is an example of an Ethernet network. The network is made up of a router,
a cable or DSL modem, your computers, and cables connecting each of these components.
The router is the central control point for the network. Attached to the router are all of
your computers or Ethernet-ready devices. Also connected to the router is a cable or DSL
modem that provides access to the Internet.
Cable/DSL
modem
Router
Tips & Tricks
Equipment you need for a router-based Ethernet network
For an Ethernet network you need:
Two or more computers with Ethernet jacks
■
One router
■
One broadband Internet connection (optional)
■
■
Ethernet cables connecting all of the network equipment
To add the ability to access a wireless Ethernet network to your wired
Ethernet network, connect an access point to the router or use a
router that has a built-in access point, such as the Linksys wireless
access point router with 4-port switch.
www.gateway.com
Introduction to Networking
83