Port & Buttons - Tenda A27 User Manual

LED Indicator Status
Solid yellow
Solid red
Blinking red slowly
Blinking red quickly
1.2.2 Port & buttons
Button/Port Description
Use the WPS button to extend WiFi network. Press the WPS button of the WiFi extender,
WPS and enable the WPS function of another device within 2 minutes to establish a WPS
connection. Please refer to
Hold down the RESET button for 1-3 seconds with a needle-like object such as the pen
RESET point. The LED indicator blinks as the reset begins. About 40 seconds later, the reset
completes.
Ethernet port.
Description
The WiFi extender has connected to your existing router and is at a
fair position. You are recommended to move it towards the router.
The WiFi extender has connected to your existing router, but is too
far away from the router. You are recommended to move it towards
the router.
The WiFi extender has been enabled but failed to extend the
network of the upstream device.
The WiFi extender is connecting to your existing router through
WPS.
RESET button
WPS button
Ethernet port
Extend your WiFi networks using WPS
2
Version1.0
for details.